|
|
Defects of the bridge expansion joints - durability and expected lifetime
Daňa, Jan ; Ing.Ladislav Šašek, CSc. (referee) ; Pošvářová, Miloslava (advisor)
This thesis discusses the types of bridge expansion joints certified for use in the Czech Republic and their disorders. The first part was a theoretical evaluation of expansion joint failures. The second part focused on clarifying the failure of anchor bolts at the cantilever expansion joint. On the basis of determining the cause was then designed a method for determining the durability of expansion joints. Prognosis life cycles corresponds records according to administrator- repair works.
|
|
|
Three-Aisled Steel Building
Lečbych, Antonín ; Bajer, Miroslav (referee) ; Buchta, Stanislav (advisor)
The thesis contains the design and assessment of three-aisled steel building for small metal production. Supporting span of construction hall is 9, 18 and 9 m. In the middle wing is situated bridge crane with capacity of 2 tons. The estimated location of the object is Luhačovice. The initial design concept was specified by supervisor (as the idea of the investor/architect), for which was did static and structural solution and assembly details. For selected option was made a calculation of supporting structures and selected assembly details. The hall has a rectangular floor plan of 36x36m and ridge height is 9 m. The central wing is made of steel and side extensions are made of glued laminated timber.
|
|
|
Centrifugal motor brake for pneumatic compactor
Vít, Jakub ; Kamarýt, Martin (referee) ; Škopán, Miroslav (advisor)
The aim of my thesis is the design of centrifugal brakes to prevent twisting of the combustion engine with pneumatic compactor. In the first part of my thesis I deal with existing and similar systems that prevent over speeding. In the second part I deal with the design of its own centrifugal brake. This includes basic functional, strength, thermal calculation, design of components and fabrication drawings according to the assignment.
|
|
|
Load bearing structure of a multi storey building
Janči, Michal ; Šmak, Milan (referee) ; Straka, Bohumil (advisor)
Diploma thesis deals with the design and assessment of the load bearing structure of a multi-storey building, proposed by the combination of two materials, steel and glued laminated timber. The building has a V-shape, the angle between legs is 120 °. Floor plan dimensions of one arm of the building are approximately 40x20m, building height is 24.3 meters. The building is designed with a flat green roof. The load bearing structure is solved as a heavy frame, lower three floors are made of steel and serves as the business premises, top four floors are residential, and their structure is designed of the glued laminated timber. Bracing of the whole structure is solved by a system of crossed steel rods.
|
|
|
Footbridge
Smělíková, Petra ; Puchner, Josef (referee) ; Sýkora, Karel (advisor)
The topic of my Bachelor's thesis is a static assessment of a bearing structure of a current footbridge which is also used for cycling. It is placed in Kunovice near Uherské Hradiště. The length of span is 28 meters. Its construction is solved as space framework with through-span. Main beam is truss structure with upper saddle flange. The height of beam in the middle of the span is 2.5 meters and above supports is 1.5 meters. The calculation is done either by hand or using calculation program Scia Engineer 2012.0.
|
|
|
Assembled Steel Tanks
Konečný, Jiří ; Hrstka, Miroslav (referee) ; Marcián, Petr (advisor)
This thesis deals with the area of bolted steel tanks, which constitute a significant share of the total number of tanks of all types of tanks. In the first part of this thesis is mentioned short history of bolted steel tanks, tanks producers and major standards and standards governing the calculation and realization not only these tanks. In the next part of this thesis mentions the various segments and major parts of bolted steel tanks. This is followed by a short description of the assembling. The last section describes the creation of a computer model of roofs used in simulation program ANSYS and subsequently performed stress-strain analysis for snow loads according to various snow areas for different FEM model in the 2D and 3D levels.
|
|
|
Hall for Metal Production with Administrative Building
Kaňok, Vojtěch ; Melcher, Jindřich (referee) ; Karmazínová, Marcela (advisor)
This diploma thesis deals with the design of a metalworking shed with its adjacent administrative center. Both objects are statically independent. The buildings are located in the town of Bučovice. The dimensions of the shed are 54,78x72,58 m. There is an overhead crane situated in the middle wing. The shed‘s height is +11,62 m. The administrative building has L-shaped plan. Its dimensions are 27,62x8,13 m (the wider part is 15,63 m). The design of the administrative object has two variants. Both variants have composite steel-concrete ceiling structure. The heights of the objects are +11,20 m (A variant) and +18,20 m (B variant). For the A variant, drawings were also drawn up with the design and assessment of structural details and anchoring.
|
|
|
Realization of educational problem based on preloaded bolted joint apparatus
Žaba, Tomáš ; Náhlík, Luboš (referee) ; Vaverka, Michal (advisor)
In the master’s thesis an educational task concerning an experimental apparatus for quantity measurement in preloaded bolted joint is realised. In terms of its preparation an innovation of the apparatus leading to an easier and faster pretension realisation was implemented. The educational task for students and also teaching material were produced. The educational task itself consists in experimental confirmation of the relation between the tightening torque and the caused pretension. An FEM model simulating an apparatus flange deformation by given pretension was designed to verify the experiment. The thesis also contains information about the preloaded bolts, pretension elicitation methods and pretension control methods.
|
|
|
Testing of service life of the bolt fastening used in electron microscopy
Habarka, Ondrej ; Radoš, Jiří (referee) ; Krejsa, Jiří (advisor)
Cílem této bakalářské práce je vybrat vhodný materiál a jeho povrchovou úpravu pro šroubový spoj s jemným závitem na držáku vzorku v elektronovém mikroskopu. První částí je přehled použitelných materiálů a povrchových úprav, které jsou nemagnetické, tudíž neovlivňují elektronový paprsek v mikroskopu. Dále se práce zabývá tvorbou testovacího zařízení na testování životnosti jednotlivých vzorků závitových tyčí. Výsledkem práce je porovnání testovaných materiálů a výběr jednoho nejvhodnějšího pro reálné použití.
|
|
|
Shopping Gallery
Žák, Ondřej ; Hron, Lukáš (referee) ; Pilgr, Milan (advisor)
Master's thesis addresses the design and assessment of the load bearing structure of the shopping gallery. The building is designed as a three-storey rectangular plan with a flat roof. The structure is composed of steel frames and composite steel and concrete slabs. There are proposed two possible solutions - variant with a flat roof and direct central gallery, a reinforced rigid steel frames and a variant with a cupola roofed circular inner atrium, solidified with rods.
|
guest ::
